4 Channel Tube Furnace_Zhengzhou Kejia Furnace

4 Channel Tube Furnace

Model：KJ-1700X-MGI-4

Description：

KJ-1700X-MGI-4 is a compact four channels 25mm O.D. tube furnace for high throughout heat treatment research of alloy and ceramic material up to 1700°C . It is an excellent tool to research the phase diagram in MGI new generation material.

Specific Introduction:
KJ-1700X-MGI-4 is a compact four channels 25mm O.D. tube furnace for high throughout heat treatment research of alloy and ceramic material up to 1700°C . It is an excellent tool to research the phase diagram in MGI new generation material.

Parameters:

Furnace Structure	The furnace is consistent with 4 small tube furnace modules with alumina tube 25 OD x 22 ID x 460 L, mm Each heating module's temperature is controlled independently up to 1700°C Quickly sealed flange, Vacuum gauge, and flowmeter are installed to allows heat treatment under vacuum or flowing gas Processing 4 samples with the different temperature at compact space
Heating Element	MoSi2
Working Temperature & Constant Temperature Zone	Continuous Working Temperature 1600° C Maximum Working Temperature 1700°C (< 1 hrs) Constant temperature zone: ± 1°C within center 30 mm cubic zone ± 5°C within center 60 mm cubic zone
Processing Tube	High purity alumina tube with Φ25X L 460 mm, 4 tubes included 4 flowmeters are included The quickly clamped flange of KF25 with mechanical vacuum gauge and needle valves Max. Vacuum 10-5 torr by turbopump Only one vacuum pump required via a KF25 port. Click the picture below to choose a vacuum pump
Temperature Control	Touch screen precision temperature controller with the protection of over-temperature and Thermal couple broke. 4 channel heating tube is controlled independently by 30 segments programmable temperature controller 4 B type Thermal Couple PC control software is included, which can control 4 channel heaters by one Laptop
Heating Rate	Max. 10 °C/ min
Temperature Accuracy	±1°C
Quenching Optional	The furnace can be upgraded to verticle quenching furnace with a rotatable frame and quenching liquid tank at extra cost
Warning & Application note	Max pressure of this furnace is 7.5 PSI （0.5 atm). You must install a pressure regulator on your gas tank to avoid over-pressured. This furnace also can be modified as a larger CVD furnace system with the proper gas delivery system. Please contact us to discuss your special application.